Shifterati

Toyota Tundra · 3rd gen (2022–2026)

2023 Toyota Tundra

This page is a draft. It has not been approved yet, so read it with care.

Watch out for

Reputation: what owners and the press report. Tap one to see what to check.

  • Engine main bearing failure 2022–2024 Walk away if found

    What to check: Run the VIN through Toyota's recall lookup, and ask for the dealer's record of the bearing inspection or new engine.

    Machining debris can make the main bearings fail and the engine stall. Toyota's recalls replace the engine where needed.

    Sources 1,2,3

  • Slow or crashing touch screen 2022–2023 One source so far

    What to check: Use the touch screen and Bluetooth on the drive, and ask whether the software has been updated.

    FLEX Automotive says the 14-inch screen was slow, crashed and dropped Bluetooth until software updates fixed it.

    Sources 1

Recalls

  • 23V111000 2022–2023

    A software fault can blank the instrument display. The software is updated.4,5,6,7

  • 23V142000 2022–2023

    The tonneau cover's joints can loosen and the cover come off. New hardware is fitted.4,5,6,7

  • 23V468000 2023

    A badly welded spare tire chain can let the spare drop. The carrier is replaced.5,7

  • 23V566000 2022–2023

    A fuel tube can rub on the brake lines and leak, a fire risk. Protection and a clamp are fitted.4,5,6,7

  • 23V633000 2023

    The load label is wrong for trucks with a bed liner. The label is replaced.5,7

  • 24V125000 2022–2024

    The truck can roll in neutral without the brakes on. The transmission software is updated.4,5,8,6,7,9

  • 24V381000 2022–2023

    Machining debris can make the engine's main bearings fail, stalling the engine. The engine is replaced.2,4,5

  • 25V322000 2022–2025

    Water can get into the reverse lights and make them fail. Both lights are replaced.4,5,8,10,6,7,9,11

  • 25V657000 2022–2025

    A software fault can stop the rearview image showing in reverse. The software is updated.4,5,8,10,6,7,9,11

  • 25V767000 2022–2024

    Machining debris can make the engine's main bearings fail, stalling the engine. The first main bearing is checked and the engine replaced if needed. It widens 24V381000.3,4,5,8

Checked against NHTSA records on 21 October 2026.

Sources

  1. FLEX Automotive (Tundra years)
  2. NHTSA recall 24V381000
  3. NHTSA recall 25V767000
  4. NHTSA recalls (2022 Tundra)
  5. NHTSA recalls (2023 Tundra)
  6. NHTSA recalls (2022 Tundra Hybrid)
  7. NHTSA recalls (2023 Tundra Hybrid)
  8. NHTSA recalls (2024 Tundra)
  9. NHTSA recalls (2024 Tundra Hybrid)
  10. NHTSA recalls (2025 Tundra)
  11. NHTSA recalls (2025 Tundra Hybrid)