2022 Toyota Tundra

This page is a draft. It has not been approved yet, so read it with care.

Watch out for

Reputation: what owners and the press report. Tap one to see what to check.

Engine main bearing failure 2022–2024 Walk away if found

What to check: Run the VIN through Toyota's recall lookup, and ask for the dealer's record of the bearing inspection or new engine.

Machining debris can make the main bearings fail and the engine stall. Toyota's recalls replace the engine where needed.

Sources ^1,2,3
Slow or crashing touch screen 2022–2023 One source so far

What to check: Use the touch screen and Bluetooth on the drive, and ask whether the software has been updated.

FLEX Automotive says the 14-inch screen was slow, crashed and dropped Bluetooth until software updates fixed it.

Sources ¹

Recalls

22V285000 2022
In the cold, the parking assist software can block the rear camera image. The software is updated.⁴
22V445000 2022
Rear axle flange nuts can loosen and let an axle shaft come out. The nuts are tightened and damaged parts replaced.^4,5
22V501000 2022
The screen can show the front camera instead of the rear in reverse. The software is updated.^4,5
22V661000 2022
The brake control unit can stop the electric parking brake setting. The software is updated.⁴
23V111000 2022–2023
A software fault can blank the instrument display. The software is updated.^4,6,5,7
23V142000 2022–2023
The tonneau cover's joints can loosen and the cover come off. New hardware is fitted.^4,6,5,7
23V566000 2022–2023
A fuel tube can rub on the brake lines and leak, a fire risk. Protection and a clamp are fitted.^4,6,5,7
24V125000 2022–2024
The truck can roll in neutral without the brakes on. The transmission software is updated.^4,6,8,5,7,9
24V381000 2022–2023
Machining debris can make the engine's main bearings fail, stalling the engine. The engine is replaced.^2,4,6
25V322000 2022–2025
Water can get into the reverse lights and make them fail. Both lights are replaced.^{4,6,8,10,5,7,9,11}
25V657000 2022–2025
A software fault can stop the rearview image showing in reverse. The software is updated.^{4,6,8,10,5,7,9,11}
25V767000 2022–2024
Machining debris can make the engine's main bearings fail, stalling the engine. The first main bearing is checked and the engine replaced if needed. It widens 24V381000.^3,4,6,8

Checked against NHTSA records on 21 October 2026.

Watch out for

Recalls

Sources