Shifterati2nd gen Toyota Tacoma 2005–2015
Watch out for
Reputation: what owners and the press report. Tap one to see what to check.
-
Frame rust 2005–2010 Walk away if found
What to check: Look over the whole frame for rust and holes, and ask whether it was replaced or treated under Toyota's frame campaign.
Toyota inspected these frames in cold-climate states, replacing badly rusted ones and coating the rest. Most of that cover has now run out.
-
Frame rust on later trucks 2011–2015 One source so far
What to check: Look over the frame, and ask whether it was inspected, coated or replaced under Toyota's 2020 campaign.
Toyota's 2020 campaign covered about 320,000 trucks built from June 2010 to June 2017, above all in states that salt their roads.
Sources 3
-
Secondary air injection failure 2012 One source so far
What to check: Ask about limp mode and air-injection fault codes.
Toyota's extended warranty for it has run out.
About $2,000 to $3,500 or more, per FLEX Automotive
Sources 2
-
Worn front wheel bearing All years One source so far
What to check: On a test drive, listen for a growl from the front wheels and feel for vibration through the floor at 30 to 45 mph.
Two members of a TacomaWorld buying thread warn of it. One felt grinding and vibration through the floor while accelerating at 30 to 45 mph, and the other warns of a growl from a bad front hub bearing.
Sources 4
-
Valve cover gasket leak All years One source so far
What to check: Look for oil seeping from the valve covers.
Two members of a TacomaWorld buying thread call it common with age. One says everyone seems to have the same leak in the same spot, and the other calls it a simple, easy fix.
Sources 5